|
|
|
|
|
| View Entry |
| |
|
| Subject |
Using TZO Outbound Mail Relay (OMR) with Argosoft SMTP Server |
| Author |
Eric McIntyre |
| |
|
| |
Using TZO OMR (Outbound Mail Relay) services with your Argosoft Mail server
1)Start the Argosoft server software and then log into the console to administer
the application settings. You should then click TOOLS and then select OPTIONS from the menu. Now click on the SMART SERVER tab and you should see the following screen shown below: Once you are at this screen, enter in
OMR.TZO.COM in the SMART SERVER field, and make sure the "always use smart server" is checked ON as shown and then click OK
Configuring
Argosoft SMTP server for use with OMR.TZO.COM Outbound mail relay service
2) Now you should click TOOLS and then select OPTIONS again from the main administrative menu as you did in step 1 - except now click on the PORTS tab and you should
see the screen shown below. If your ISP bocks port 25 outbound, you can use the Argosoft
server to specify a secondary SMTP port as shown below. Make sure the SECONDARY SMTP PORT box is checked ON, and set the port to 2525 instead of the default.
Configuring the Argosoft server for use with OMR.TZO.COM Outbound
mail relay service
3)Thats it! Click OK to save the port information. You should now restart the
Argosoft SMTP server for these changes to take place. All outgoing SMTP e-mail will then be forwarded to TZO's Outgoing Mail Server and delivered successfully to other Internet mail servers
|
|
|
|
